Almost every home in Auckland has at least one wool rug to decorate their space. Wool rugs are delicate fabrics because they are made from natural fabrics. Even treated and stain-protected wool can get stained and damaged, so you need to be extra careful when cleaning them. A simple guide to steam clean wool carpet is listed in this article.
The good news is you can steam clean your wool carpet for at least a year. It may look clean on the surface, but there is a lot of hidden dirt under the rug. Call an Auckland carpet cleaning professional for steam cleaning. It will remove the accumulated dirt. If the rug is in a high-traffic area, we recommend doing it twice a year.
Here is a step-by-step guide on how you can steam clean your wool carpet.
Step 1: Give the rug a good shake
Rug cleaning begins with giving the carpet a good shake. It will remove the dust, loose dirt, and pollen that are embedded in the weaves. Take the wool carpet outside and then shake it out.
Pro Tip: The best way to remove the dirt is by hanging the carpet on a laundry line or patio beam. Get the embedded dirt out by beating the rug inside out using a wooden spoon. Be careful when doing this, especially if you have allergies. Wear a mask to prevent breathing in the pollutants.
Step 2.Vacuum the wool rug
An Auckland carpet cleaning vacuums the carpet well before removing any stain or steam cleaning. You should follow this too. A good vacuuming will lift the debris and dirt hidden under the carpet.
Pro Tip: Before vacuuming the carpet, make sure to know your carpet’s pile type. For flat or dense piles, use the traditional brush. If you have a shaggy wool carpet, you need to use the brushless attachment or suction-only.
Step 3. Condition the carpet with a powder-based conditioner
Your wool carpet is delicate. As such, cleaning it with a standard shampoo or wetting it with a cleanser will damage the fibres. Excess moisture will ruin the wool and harbour moulds. Clean wool carpet with a powder-based conditioner.
Pro-Tip: Use only a thin layer of the powder and rub it into the carpet with your hands or a soft bristle brush. Also, let the powder sit for a few minutes before vacuuming.
Step 4. Spot clean the heavily stained areas
To get professional results on your Auckland carpet cleaning, remove the stubborn stains with a gentle cleanser. Consider using a homemade stain remover made with a combination of a drop of mild detergent, eight-part water, and one-part white vinegar.
Pro Tip: Dab the solution with a clean paper towel and rub it in a circular motion until the stain is gone.
Step 5. Perform a light steaming to freshen the wool carpet
Light steaming is recommended for wool carpets because the wool can hold moisture. Steaming will remove the odour and freshen it up.
Pro Tip: When steaming, professionals recommend holding the steamer about six inches away. Steam in a circular motion and do not steam the same spot for more than five seconds. Let the wool rug dry completely.
Wrapping It Up!
You see, wool rug cleaning is not as simple as it seems. We recommend handling the dirty work with the professionals. Premium Clean offers Auckland carpet cleaning for all types of carpet. Our professional cleaners know how to handle wool rugs with care.
Julie Ann Salvatierra is a freelance writer and a mother of three. She enjoys being part of a project that builds a brand or launches a business to the next level. As much as she loves writing, she tries to keep the balance by spending time with her kids and living life to the fullest.